Description
The FCS Series RIP-R-STRIPPERS® have revolutionized the industry with their innovative design and operational features.Quickly remove VCT tiles, rubber-backed carpeting and sheet type coverings from wood and concrete surfaces. Welded, unitizedframe. Adjustable operator handle folds for transport. Direct-drive, random orbit action; 14 lbs external weight. Includes 1 each,part number FCS16-1100, 4″ x 6″ straight blade and 1 each, part number FCS16-1300, 3″ x 10″ straight blade.
FRAME
- Structure: Unitized, welded steel plate.
- Bearings: Zerk type fittings.
- Drive System:
Exciter unit mounted directly to motor drive shaft. - External Weight: 15 lbs (6.8kw) steel block.
- Wheel Scraper: 2 inch, externally mounted, fully adjustable for wear compensation Operator.
- Handle: Adjustable height and foldable.
GENERAL
- Width: 14-1/2 inch (368 mm)
- Width (at operator handle): 23 inch (584 mm)
- Height (at operator handle extension):
42 inch (1067 mm) - Length (handle folded): 24 inch (610 mm)
- Length (at operator configuration):
34 inch (864 mm)
POWER SOURCE
- Type: Lesson, single phase
115/230 VAC, 60 Hz - Horse Power: 3/4HP (.56kw)
SPECIFICATIONS
- Operating Environments:
Non-hazardous type locations - Electric Motor: 75HP, 115VAC, 60HZ, 15 amperes
- Nominal Oscillations: 1725/minute
- Frame: Unitized, welded steel plate.
- Bearings: Ball-type
- Drive System: Direct
- Extension Cord:
12-3, SJTW x 37 ft (11 m) L, w/GFI - Width: 14-1/2 inch (368 mm).
- Width (at operator handle): 23 inch (584 mm).
- Height (at operator handle extension):
42 inch (1067 mm). - Length (handle folded): 24 inch (610 mm).
- Length (at operator configuration):
34 inch (864 mm). - Weight:132 lbs (59 kg), less blade
General FCS16 Floor Stripper
 |
General FCS16 Specifications |
|
General FCS16 Parts Manual |
|
General FCS16 Operators Manual |
* Prices are subject to change. Tax and other fees not shown in above price estimate.
