Description
The Rolair 1-1/2 HP (115V) 7.3 CFM at 90PSI, 9-gallon twin-tank compressor is a heavy-duty machine capable of running various pneumatic tools simultaneously. This Rolair compressor’s single-stage pump features two cast-iron cylinders, splash lubricated ball bearings, valve plates of hardened steel and connecting rods of aluminum alloy for long-lasting performance. The pump operates at a low speed and the quiet operation reduces onsite noise. This 1-1/2-HP compressor motor runs at 1755 RPM, on 115 or 230V, and has thermal overload protection and a manual reset for extra safety. The unit weighs 150 pounds and has one 10-inch diameter wheel for easy mobility. This Rolair twin-tank compressor operates between 110 and 135 PSI and the pressure gauge marks from 0 to 200 in 5-pound graduations for exact pressure control.
FEATURES
- Run up to nine trim or finish guns with this heavy duty compressor
- Top quality components and construction ensure a long working life
- Quiet operation for reduced noise on the job site
- Thermal overload protects the 1-1/2 HP motor from overheating
- 10-inch wheel allows easy positioning
- Rolair twin-tank compressor operates between 110 and 135 PSI
- Gauge shows correct operating pressure to power all your pneumatic tools
SPECIFICATIONS
- Horse Power: 1.5 HP
- CFM Displaced: 10.1 CFM
- CFM Delivered: 7.3 CFM @ 90 PSI
- Pump/Motor Rpm: 1725 RPM
- Overload Protection: Yes (Manual Reset Standard)
- Lubrication Type: Splash Lubrication
- Pump Oil Capacity: 34 Oz.
- Reed Valve System: Yes (Standard)
- Number of Cylinders: 2
- Tank Capacity: 9 Gallons
- L x W x H: 46″X19″X28″
Rolair Twin Tank Compressor
